AIR-EAGLE® SR PLUS 2.4 GHz RF Transceiver
The AIR-EAGLE® SR PLUS 2.4 GHz RF Transceiver offers robust wireless communication for industrial applications. This unit provides a reliable 2.4 GHz link with 60 mW RF output power, extending control signals up to 600 feet. Its design accommodates a wide input voltage range of 100-250 VAC at 50/60 Hz, ensuring compatibility across various power systems. The transceiver features one dry contact input and one output, simplifying integration into existing control schemes. Encased in a NEMA 4, 12, 13 and IP66 rated polycarbonate housing, it withstands challenging environmental conditions, operating effectively from -40 to +185 F. This device facilitates dependable remote control and monitoring in demanding industrial settings, minimizing wiring complexities and enhancing operational flexibility. Its spread spectrum frequency technology further contributes to signal integrity in congested RF environments, ensuring consistent performance.
- 2.4GHz, 600 Ft. Range
- Single Dry Contact Input
- Single Relay Output
- 120VAC Powered
Specifications
| Input Voltage | 100 VAC |
|---|---|
| Input Power | 5 W |
| Input Frequency | 0.83 Hz |
| Transmitter Frequency | 2.4 |
| Frequency Technology | Spread Spectrum |
| Transmit Data Type | Dry Contact Input |
| Number of Inputs | 1 |
| Number of Outputs | 1 |
| RF Output Power | 60 mW |
| Transmit Range | Up to 600 |
| RF Networks | Eight Independent Frequencies |
| Contact Configuration | SPDT |
| Contact Rating | 5 A |
| Antenna Connection | TNC Female Connector |
| Operating Temperature | -40 to +185 |
| Enclosure Material | Polycarbonate |
| Enclosure Rating | NEMA 4, 12, 13 |
| IP Rating | IP66 |
| Approval - United States (FCC) | MCQ-XBEE3 |
| Approval - Canada (IC) | 1846 A |
| Approval - Europe (CE) | ETSI |
| Included Accessory | 2.4GHz TNC 'Rubber Duck' Antenna (49-1201) |
| Config: Relay Operation | Momentary (default), Toggle/Latch, Latching |
| Config: SW3 Option | Vibrating Feedback Off (default), Vibrating Feedback On |
| Config: SW4 Option | Repeater Mode Off (default), Repeater Mode On |
| Config: Network Frequency | 1 (default), 2, 3, 4, 5, 6, 7, 8 |
