1732
The Model 1732 AC Current Monitor provides essential current sensing capabilities for industrial systems. This self-powered unit eliminates the need for an external supply voltage, simplifying installation and reducing wiring complexity. It accurately monitors AC currents within a 25 to 150 amp range, offering both over and under current detection. With a rapid 100ms response time, it ensures timely system protection and control. The device features a SPDT 10A at 240VAC resistive contact rating and maintains 1% maximum repeat accuracy across a -20° to +140° F operating temperature range. Dual LED indicators provide clear status feedback, aiding in quick diagnostics. Mounting options include surface or 35mm DIN rail, enhancing application versatility. Its screwdriver adjustable settings allow for precise calibration. This monitor delivers consistent performance for critical operational oversight.
The Model 1732 AC Current Monitor is a single set-point current monitor.
It can be used to detect either over current or under current, depending
on whether the trip point is set above or below the input current. Dual
LED indicators on the front or top of the unit give a clear visual
reference for a fault condition. The Model 1732 generates its operating
voltage from the monitored current line, so no external power supply is
required. A current greater than 25 amps is needed to energize the
internal relay. Momentary current above 150 amps will not damage the
unit, however, the maximum current set-point is 150 amps. The Model 1732
is not frequency sensitive, and can be used on AC currents from 50 to
400 Hz.
Out of stock
Specifications
| Supply Voltage | none required |
|---|---|
| Input Current Minimum | 25 amps |
| Input Current Maximum | 150 amps |
| Adjustment Range | 25 to 150 amps |
| Maximum Wire Size | 2 AWG |
| Response Time | 100ms |
| Contact Rating | SPDT 10A at 240VAC resistive |
| Repeat Accuracy | 1% |
| Dead Band | Approximately 2% |
| Operating Temperature | -20° to +140° F |
| Reset | Automatic |
| Terminals | 1/4" quick connects |
| Enclosure Material | ABS plastic |
| Mounting | Surface Mount or DIN Rail 35mm |
| Current Sensing | Over or Under Current |
| Indicators | Dual LED Condition Indicators |
| Energize Current | A current greater than 25 amps is needed to energize the internal relay |
| AC Current Frequency Range | 50 to 400Hz |
| Adjustment Method | Screwdriver adjustable |
| Warranty | 1 year |
